← Back to quizzesFree quiz

Kiến thức cơ bản về mạch điện và thiết bị điện

Welcome to this comprehensive course on basic electrical circuit theory. Whether you are a student of electrical engineering , a hobbyist, or a professional looking to refresh core concepts,…

10 questions~5 min
Kiến thức cơ bản về mạch điện và thiết bị điện — Qwi
0 / 10
Score: 0%
1

Mạch điện là gì?

2

Theo định luật Ohm cho toàn mạch, điện trở tổng của mạch được tính như thế nào?

3

Công suất thực được tính bằng công thức nào?

4

Giá trị hiệu dụng của điện áp hình sin bằng bao nhiêu so với biên độ?

5

Hệ số công suất (cos) biểu thị gì?

6

Trong kết nối sao ba pha, điện áp dây (Ud) so với điện áp pha (Up) bằng bao nhiêu?

7

Điện trở tương đương của các điện trở mắc nối tiếp là:

8

Điện trở tương đương của các điện trở mắc song song được tính như:

9

Trong hình, bộ phận nào là dây tóc kim loại?

10

Trong hình, thành phần nào là hộp chứa cầu chì với nắp kim loại?

Fundamentals of Electrical Circuits and Devices

Welcome to this comprehensive course on basic electrical circuit theory. Whether you are a student of electrical engineering, a hobbyist, or a professional looking to refresh core concepts, this guide covers the essential principles you need to master. The content is structured around key topics that frequently appear in quizzes and exams, ensuring you gain both conceptual understanding and practical problem‑solving skills.

What Is an Electrical Circuit?

An electrical circuit is a closed loop that allows electric current to flow continuously. It consists of a power source (such as a battery or generator), conductive paths (wires), and one or more electrical devices (loads) like resistors, capacitors, or motors. The defining characteristic of a circuit is its closed path; without a complete loop, current cannot travel, and the circuit remains inactive.

  • Closed loop: Provides a continuous path for electrons.
  • Power source: Supplies voltage that drives the current.
  • Conductors: Typically copper wires that connect components.
  • Loads: Devices that consume electrical energy (e.g., lamps, heaters).

Understanding the closed‑loop nature of circuits is the foundation for analyzing more complex arrangements such as series, parallel, and three‑phase networks.

Ohm’s Law for the Whole Circuit

Ohm’s Law is a cornerstone of circuit analysis. For an entire circuit, the total resistance Rtotal is the sum of all individual resistances when they are connected in series. The relationship is expressed as:

Rtotal = R + rd + r0

where:

  • R – the primary load resistance.
  • rd – resistance of the connecting wires.
  • r0 – internal resistance of the power source.

By adding these resistances, you obtain the total opposition to current flow, which is essential for calculating circuit current using I = V / Rtotal.

Real Power (Active Power)

In alternating‑current (AC) systems, power is divided into three components: apparent power (S), reactive power (Q), and real (active) power (P). Real power represents the portion of electrical energy that is actually converted into useful work (heat, light, mechanical motion). The formula for real power is:

P = U · I · cos φ

where:

  • U – RMS voltage.
  • I – RMS current.
  • cos φ – power factor, the cosine of the phase angle between voltage and current.

The power factor indicates how effectively the current is being used to produce real work. A power factor of 1 (or 100 %) means all the supplied current contributes to real power, which is the ideal situation for most industrial loads.

Effective (RMS) Value of a Sinusoidal Voltage

When dealing with sinusoidal waveforms, the root‑mean‑square (RMS) value provides a convenient way to compare AC quantities with DC equivalents. For a sinusoidal voltage, the RMS value is:

Urms = 0.707 · Umax

This factor (≈ 1/√2) arises from the mathematical definition of RMS and is crucial for correctly sizing components such as transformers, fuses, and protective devices.

Power Factor (Cos φ)

The power factor, often denoted as cos φ, quantifies the ratio of real power to apparent power:

cos φ = P / S

It reflects how much of the supplied apparent power is actually doing useful work. A low power factor indicates a large portion of reactive power, which can cause inefficiencies and higher electricity bills. Improving the power factor (e.g., by adding capacitors) is a common practice in industrial facilities.

Three‑Phase Star (Wye) Connection: Line vs. Phase Voltage

Three‑phase systems are widely used in power distribution because they provide a constant transfer of power. In a star (wye) configuration, the relationship between line voltage (Ud) and phase voltage (Up) is:

Ud = √3 · Up

This factor of √3 (≈ 1.732) results from the geometric arrangement of the three phases. Understanding this relationship is essential for correctly selecting equipment ratings and ensuring safe operation of three‑phase machinery.

Equivalent Resistance in Series Circuits

When resistors are connected end‑to‑end (in series), the total or equivalent resistance is simply the arithmetic sum of the individual resistances:

Req = R1 + R2 + … + Rn

This additive property makes series circuits straightforward to analyze. The current flowing through each resistor is identical, while the voltage across each resistor is proportional to its resistance (Ohm’s Law).

Equivalent Resistance in Parallel Circuits

Parallel connections behave differently. The reciprocal of the equivalent resistance equals the sum of the reciprocals of each individual resistance:

1 / Req = Σ (1 / Ri)

Or, for two resistors:

Req = (R1·R2) / (R1 + R2)

This formula shows that the equivalent resistance of a parallel network is always lower than the smallest individual resistor, which is why parallel branches provide multiple paths for current.

Practical Applications and Common Mistakes

Below are some real‑world scenarios where these concepts are applied, along with tips to avoid typical errors:

  • Designing a lighting circuit: Ensure the total series resistance does not exceed the source’s capacity; otherwise, voltage drop will dim the lights.
  • Choosing a transformer for a three‑phase motor: Use the line‑to‑line voltage relationship (Ud = √3 · Up) to match the motor’s rating.
  • Improving power factor: Install capacitor banks to offset inductive loads, reducing reactive power and lowering electricity costs.
  • Calculating heating element power: Apply P = U·I·cos φ, remembering that for purely resistive loads cos φ = 1, simplifying the equation to P = U·I.

Common mistakes include confusing RMS values with peak values, forgetting to add wire resistance in series calculations, and overlooking the √3 factor in three‑phase systems. Double‑checking each step against these guidelines helps ensure accurate results.

Summary of Key Formulas

  • Closed‑loop circuit: Current flows only when the path is complete.
  • Total resistance (series): Rtotal = R + rd + r0
  • Real power: P = U·I·cos φ
  • RMS voltage (sinusoidal): Urms = 0.707 · Umax
  • Power factor: cos φ = P / S
  • Three‑phase line voltage: Ud = √3 · Up
  • Series resistance: Req = Σ Ri
  • Parallel resistance: 1 / Req = Σ (1 / Ri)

Further Learning Resources

To deepen your knowledge, explore the following resources:

  • Electronics Tutorials – Comprehensive guide to circuit analysis
  • All About Circuits – Articles on power factor correction
  • IEEE Xplore – Research papers on three‑phase power systems

By mastering these fundamentals, you are well‑equipped to tackle more advanced topics such as transient analysis, digital electronics, and power electronics design.