← Back to quizzesFree quiz

Kiểm tra kiến thức xử lý số liệu môi trường

Environmental scientists and engineers frequently work with water‑quality parameters such as dissolved oxygen (DO), chemical oxygen demand (COD), total suspended solids (TSS), and pH.…

10 questions~5 min
Kiểm tra kiến thức xử lý số liệu môi trường — Qwi
0 / 10
Score: 0%
1

Dãy nồng độ DO (mg/L): 6; 8; 10; 12; 14. Giá trị trung bình cộng của bộ số liệu là bao nhiêu?

2

Cho dãy COD (mg/L): 4; 6; 7; 10; 30. Trung vị của bộ số liệu này là:

3

Với bộ số liệu TSS (mg/L): 12; 15; 18; 20; 31, khoảng biến thiên R bằng:

4

Dữ liệu pH: 6; 7; 8; 9. Phương sai mẫu s² tính theo công thức trong tài liệu là:

5

Nếu phương sai mẫu s² = 1,667, độ lệch chuẩn mẫu s bằng:

6

Một dãy số liệu NO₃⁻ (mg/L): 2; 3; 3; 3; 4; 5. Giá trị mode của dãy là:

7

Với dãy TSS (mg/L): 10; 12; 14; 16; 18, trung bình cộng và khoảng biến thiên R lần lượt là:

8

Một bộ số liệu có x̄ = 20 mg/L và độ lệch chuẩn s = 2 mg/L. Hệ số biến thiên CV là:

9

Hai giá trị nồng độ NO₂⁻ là 40 và 50 μg/m³. Chênh lệch tuyệt đối ΔC bằng:

10

Trong một chương trình quan trắc, QA và QC được phân biệt như thế nào?

Understanding Basic Statistical Measures for Environmental Data

Environmental scientists and engineers frequently work with water‑quality parameters such as dissolved oxygen (DO), chemical oxygen demand (COD), total suspended solids (TSS), and pH. Mastering the fundamental statistical tools—mean, median, range, variance, standard deviation, mode, and coefficient of variation—enables you to interpret monitoring results, assess compliance, and make data‑driven decisions.

1. Arithmetic Mean (Average)

The arithmetic mean, often called the average, is the sum of all observations divided by the number of observations. It provides a single value that represents the central tendency of a data set.

Formula: \(\bar{x}=\frac{\sum_{i=1}^{n}x_i}{n}\)

For the DO series 6, 8, 10, 12, 14 mg/L:

  • Sum = 6 + 8 + 10 + 12 + 14 = 50
  • Number of observations (n) = 5
  • Mean = 50 ÷ 5 = 10 mg/L

This value is the answer to the first quiz question and illustrates how the mean summarises the overall oxygen level in the water body.

2. Median (Middle Value)

The median is the middle observation when the data are ordered from smallest to largest. If the number of observations is odd, the median is the central value; if even, it is the average of the two central values.

Consider the COD series 4, 6, 7, 10, 30 mg/L:

  • Ordered data: 4, 6, 7, 10, 30
  • There are 5 values → the 3rd value is the median.
  • Median = 7 mg/L

The median is less affected by extreme values (like the 30 mg/L) than the mean, making it a robust indicator for skewed environmental data.

3. Range (R)

The range measures the spread of the data by subtracting the smallest value from the largest value:

Formula: R = x_{max} - x_{min}

For the TSS series 12, 15, 18, 20, 31 mg/L:

  • Maximum = 31 mg/L
  • Minimum = 12 mg/L
  • Range = 31 – 12 = 19 mg/L

The range provides a quick sense of variability but does not describe the distribution shape.

4. Sample Variance (s²)

Variance quantifies the average squared deviation of each observation from the mean. It is essential for assessing the consistency of water‑quality measurements.

Formula for a sample of n observations:

\(s^{2}=\frac{\sum_{i=1}^{n}(x_i-\bar{x})^{2}}{n-1}\)

Using the pH series 6, 7, 8, 9:

  • Mean \(\bar{x}\) = (6+7+8+9)/4 = 7.5
  • Deviations: -1.5, -0.5, 0.5, 1.5
  • Squared deviations: 2.25, 0.25, 0.25, 2.25
  • Sum of squares = 5.0
  • Variance = 5.0 ÷ (4‑1) = ≈ 1.667

This matches the fourth quiz answer and demonstrates how variance captures the spread of pH values around the mean.

5. Sample Standard Deviation (s)

The standard deviation is the square root of the variance, returning the spread to the original units of measurement.

Formula: \(s = \sqrt{s^{2}}\)

Given the variance s² = 1.667 from the pH example:

  • Standard deviation = \(\sqrt{1.667}\) ≈ 1.291

This value is the correct answer for the fifth quiz question and is useful for constructing confidence intervals for environmental parameters.

6. Mode (Most Frequent Value)

The mode is the value that appears most often in a data set. A data set may have one mode (unimodal), more than one (multimodal), or none.

For the nitrate series 2, 3, 3, 3, 4, 5 mg/L:

  • Frequency of 2 = 1
  • Frequency of 3 = 3
  • Frequency of 4 = 1
  • Frequency of 5 = 1
  • Mode = 3 mg/L

Identifying the mode helps highlight typical concentration levels, especially when the distribution is skewed.

7. Combining Mean and Range

When both the mean and range are required, calculate each separately and present them together. For the TSS series 10, 12, 14, 16, 18 mg/L:

  • Mean = (10+12+14+16+18)/5 = 14 mg/L
  • Range = 18 – 10 = 8 mg/L
  • Result: Mean = 14 mg/L, Range = 8 mg/L

This answer aligns with the seventh quiz item and illustrates how to report central tendency together with variability.

8. Coefficient of Variation (CV)

The coefficient of variation expresses the standard deviation as a percentage of the mean, allowing comparison of relative variability across different units or scales.

Formula: CV = (s / \bar{x}) × 100 %

Given a data set with mean \(\bar{x}=20 mg/L\) and standard deviation \(s=2 mg/L\):

  • CV = (2 / 20) × 100 = 10 %

This is the correct response for the eighth quiz question and indicates that the data vary by 10 % around the mean—a moderate level of dispersion for water‑quality measurements.

Key Takeaways for Environmental Data Analysis

  • Mean provides a quick snapshot of average conditions but can be skewed by outliers.
  • Median offers a robust central value, especially useful when extreme values are present.
  • Range gives the total spread but ignores distribution shape.
  • Variance and standard deviation quantify variability in squared and original units, respectively.
  • Mode highlights the most common concentration, valuable for identifying typical pollutant levels.
  • Coefficient of variation enables comparison of relative variability across different parameters.

By mastering these concepts, environmental professionals can accurately interpret monitoring data, communicate findings to stakeholders, and support evidence‑based management of water resources.

Practical Tips for Applying Statistics in the Field

  • Always check data for entry errors before calculating statistics.
  • Use spreadsheet software or statistical packages (e.g., R, Python pandas) to automate calculations and reduce manual errors.
  • When reporting results, include both the central tendency (mean or median) and a measure of dispersion (standard deviation or range) to provide a complete picture.
  • For regulatory compliance, compare calculated statistics against guideline thresholds (e.g., WHO water quality standards).
  • Visualise data with box‑plots or histograms to complement numerical summaries and reveal distribution patterns.

Further Reading and Resources

  • World Health Organization – Water Quality Guidelines
  • U.S. EPA Water Data and Tools
  • R Project for Statistical Computing
  • Pandas Library – Data Analysis in Python