
Cơ bản về chất bán dẫn và thiết bị bán dẫn
Understanding the basic principles of semiconductor physics is essential for anyone studying electronics, electrical engineering, or applied physics. This course covers the key concepts…

Ở 300 K, nồng độ hạt tải tự do (ni) của silicon thuần khiết là bao nhiêu?
Nếu pha P (phốt pho) vào silicon, chất bán dẫn tạo ra loại nào?
Khi nối p‑n được phân cực ngược, hiện tượng nào xảy ra ở vùng đảo tính?
Hiệu ứng Zener xảy ra khi điện trường đạt tới hạn khoảng bao nhiêu V/cm?
Công thức dòng điện thuận của diode là I = Iₛ (e^{V/0.026} – 1). Khi V = 0.6 V, Iₛ = 20 µA, giá trị I gần bằng:
Tại điểm Q có V_D = 0.8 V và I_D = 20 mA, điện trở tĩnh của diode là:
Trong transistor pnp, hệ số khuếch đại dòng β được xác định bởi:
Hình ảnh dưới đây mô tả cấu trúc tinh thể của chất bán dẫn thuần khiết Si. Số electron ngoại vi là bao nhiêu?
Khi pha Boron (B) vào silicon, loại bán dẫn tạo ra là:
Fundamentals of Semiconductors and Semiconductor Devices
Understanding the basic principles of semiconductor physics is essential for anyone studying electronics, electrical engineering, or applied physics. This course covers the key concepts tested in a typical quiz, including material classifications, intrinsic carrier concentration, doping effects, p‑n junction behavior, Zener breakdown, diode characteristics, and transistor current gain. By the end of this module, you will be able to explain why semiconductors occupy a unique position between conductors and insulators, calculate important parameters, and relate theory to practical device operation.
1. Classification of Materials by Electrical Resistivity
Materials are commonly grouped into three categories based on their resistivity:
- Conductors – very low resistivity, allowing free flow of electrons.
- Insulators – extremely high resistivity, preventing charge movement.
- Semiconductors – resistivity that lies between conductors and insulators, and can be modified by temperature, impurities, or electric fields.
The defining feature of a semiconductor is its ability to change conductivity dramatically with small changes in external conditions. This property makes semiconductors the backbone of modern electronic devices.
2. Intrinsic Carrier Concentration of Pure Silicon
At room temperature (approximately 300 K), pure silicon exhibits a small but crucial number of thermally generated charge carriers. The intrinsic carrier concentration ni is given by:
ni = √(Nc Nv)·e−Eg/2kT
where Nc and Nv are the effective density of states in the conduction and valence bands, Eg is the band‑gap energy (≈1.12 eV for silicon), k is Boltzmann’s constant, and T is absolute temperature.
Plugging the values for silicon yields:
- ni ≈ 1.5 × 1010 cm⁻³
This relatively low concentration explains why pure silicon behaves as a weak conductor at room temperature, yet it provides a baseline for doping calculations.
3. Doping: Creating n‑type and p‑type Semiconductors
Doping introduces impurity atoms that either donate extra electrons (n‑type) or create holes (p‑type). The quiz question asks what happens when phosphorus (P) is added to silicon:
- Phosphorus has five valence electrons, one more than silicon’s four. The extra electron becomes a free carrier, turning the material into an n‑type semiconductor.
Conversely, adding boron (which has three valence electrons) would produce a p‑type material by creating holes.
4. Reverse‑Biasing a p‑n Junction
When a p‑n junction is reverse‑biased, the external voltage widens the depletion (or "inversion") region. The dominant physical effect is the formation of a strong internal electric field that opposes carrier flow. Key points include:
- The field strength increases with reverse voltage, reaching values that can trigger breakdown mechanisms.
- Current remains very small (leakage current) until breakdown occurs.
This internal electric field is the basis for the Zener effect, which is discussed next.
5. Zener Breakdown and Critical Electric Field
In heavily doped p‑n junctions, a high electric field can cause electrons to tunnel from the valence band of the p‑side to the conduction band of the n‑side. This phenomenon, known as Zener breakdown, typically occurs when the field reaches about 100 000 V/cm (or 10⁵ V/cm). At this magnitude, the band‑to‑band tunneling probability becomes significant, allowing the diode to conduct in reverse bias.
Designers exploit this effect to create Zener diodes that regulate voltage precisely in electronic circuits.
6. The Diode Forward‑Current Equation
The ideal diode equation describes the relationship between forward voltage V and current I:
I = Is (e^{V/0.026} – 1)
where Is is the saturation current and the factor 0.026 V corresponds to the thermal voltage at 300 K (kT/q).
For a typical example, let V = 0.6 V and Is = 20 µA:
- Calculate the exponential term: e^{0.6/0.026} ≈ e^{23} ≈ 6 × 10⁹.
- Multiply by Is: 20 µA × 6 × 10⁹ ≈ 1.2 mA.
- The “–1” term is negligible compared with the huge exponential, so the forward current is approximately 1.2 mA.
This calculation illustrates why small changes in forward voltage produce large current variations—a principle used in rectifiers, switches, and signal detectors.
7. Dynamic (Small‑Signal) Resistance of a Diode
Dynamic resistance rd (also called static resistance at a specific operating point) is defined as the derivative of voltage with respect to current:
rd = ΔV / ΔI ≈ V_D / I_D for a small region around the operating point.
Given a point Q with V_D = 0.8 V and I_D = 20 mA:
- rd = 0.8 V / 0.020 A = 40 Ω.
This resistance is crucial for designing bias networks and predicting how a diode will respond to small AC signals superimposed on a DC bias.
8. Current Gain (β) in a PNP Transistor
Transistor operation is often described using two related parameters:
- α – the common‑base current gain, defined as IC/IE.
- β – the common‑emitter current gain, defined as IC/IB.
These parameters are linked by the algebraic relationship:
β = α / (1 – α)
Derivation: Since IB = IE – IC = IE(1 – α), then β = IC/IB = α IE / [IE(1 – α)] = α/(1 – α). This formula shows that as α approaches 1 (very efficient carrier transport), β grows very large, which is typical for high‑gain transistors.
9. Summary of Key Concepts
- Semiconductors have intermediate resistivity and can be engineered via doping.
- Intrinsic silicon at 300 K has ni ≈ 1.5 × 10¹⁰ cm⁻³.
- Phosphorus doping creates n‑type material; boron creates p‑type.
- Reverse‑biased p‑n junctions develop a strong internal electric field.
- Zener breakdown occurs around 100 000 V/cm.
- Diode forward current follows I = Is(e^{V/0.026} – 1); a 0.6 V forward bias yields ~1.2 mA for Is = 20 µA.
- Dynamic resistance at V_D = 0.8 V, I_D = 20 mA is 40 Ω.
- Transistor current gain β = α/(1 – α).
These fundamentals provide a solid foundation for deeper study of semiconductor devices, circuit design, and modern electronics. Mastery of these concepts will improve both theoretical understanding and practical problem‑solving skills.
